Application Library - Analytical Elemental analysis

In this on-line library you can find recent application notes published by LECO.
Use the search function to browse available application notes by keywords
Please note, that LECO has been manufacturing analytical instrumentation since 1936 and many other application notes are available in house. If you need an application note that pertains to your industry, but don’t find it in the library, please contact us.

Here below 20 application documents of the product library containing 211 downloadable docs. Registration on website is required to access to this content.

TGA801 – Moisture, Volatile Matter, Ash, and Fixed Carbon Determination in Coke

Moisture, volatile matter, and ash are all important solid fuel characterization measurements for coke materials.Learn more...

TGA801 – Moisture, Volatile Matter, Ash, and Fixed Carbon Determination in Coal

Moisture, volatile matter, and ash are all important solid fuel characterization measurements for coal materials.Learn more...

CS744 – Carbon and Sulfur Determination in Low Carbon Ferroalloys

Ferroalloys are alloys of iron that contain a high level of one or more additional primary elements.Learn more...

Determination of Moisture in Flour

In this application note a primary analysis method for moisture in food is described.Learn more...

Determination of Moisture in Feed Products

In this application note a primary analysis method for moisture in feed is described.Learn more...

Wire and ROD Analysis with LECO GDS

In this application note some methods are described that allows a perfect analysis of thin and/or long samples like wired and rods.Learn more...

Performance of GDS to Analyze Grey Iron and Other As-Cast Materials

Glow discharge spectrometry (GDS) is capable of analyzing all types of cast irons while other techniques, especially spark-emission spectrometry, commonly struggle in this area. This capability arises from several features of glow discharge sputtering that decidedly differentiate these techniques.Learn more...

Thermogravimetric Analysis of Flue Gas Desulfurization (FGD) gypsum

Macro TGA (Thermogravimetric analysis ) is used for quality control and characterization of the FGD gypsum product. This application note describes the method for determination and monitoring of constituents in FGD solids material such as gypsum, calcium sulphite, limestone, free moisture and moisture in hydrates.Learn more...

Determination of Carbon, Nitrogen, and Sulfur in Plant Tissue

The LECO advanced TruMac CNS instrument can be successfully used to simultaneous analyze of CNS elements content in soil and plant tissues. This application note describes method settings, instrument calibration and testing procedure. Typical results are shown.Learn more...

Sulfur Determination in Ultra Low Sulfur Steel, Nickel, and Superalloys

The LECO CS844ES with a detection limit of approximately 0.1 μg of sulfur expands the capability of the combustion technique to levels previously limited to GD-MS. The following application note outlines the settings and steps required to determine ultra-low levels of sulfur in steel, nickel, and superalloys.Learn more...

Determination of Carbon and Sulfur in Cast Iron

The following application note outlines the settings and steps required to determine the carbon and sulfur levels in cast iron with the CS/C/S844 series of elemental analyzers. With its simultaneous carbon and sulfur detection capability and easy-to-use touch-screen interface, the CS844 carbon and sulfur by combustion analyzer makes the perfect addition to any foundry laboratory.Learn more...

Determination of Surface Carbon on Aluminum Sheets/Rods/Wire

The LECO RC612 is a multiphase carbon and moisture determinator specifically designed to differentiate various forms of carbon by the temperature at which they combust. This capability facilitates the determination of the amount of carbon present on the surface of aluminum sheets or rods, which is relative to the amount of oils or surface modifying treatments.Learn more...

Determination of Nitrogen/Protein in Whey Products on FP628

Whey protein is a common ingredient in many dietary supplements due to its availability, solubility, and unique functional characteristics. The accurate and precise determination of protein in whey products not only plays a role in the characterization of nutritional or dietary value in dairy products, but may also be a key in determining the quality or category of the whey product. Protein in whey and other food products is most commonly calculated using the measured nitrogen in the sample and a protein factor multiplier (protein factors vary according to the sample matrix).Learn more...

Determination of Moisture, Volatile Matter,and Ash in Biomass/Plant Tissue

Moisture, volatile matter, and ash are important constituents for the quality characterization of fuel materials. Macro TGA701 can determinate all 3 parameters on one sample. Up to 19 samples run simultaneously.Learn more...

Sulfur In Hydrocarbons By High Temperature Combustion

Sulfur in determination by High Temperature Combustion and IR Detection (ASTM D1552) is applicable to petroleum products with boiling point above 177C including diesel fuel, residual fuels, lubricating oils containing additives, and in additive concentrates.Learn more...

Determination of Carbon In Nitrides by LECO C844

The determination of carbon in nitrides by LECO 844 series analyzer is a quick and direct measurement of nitride purity.Learn more...

Determination of Carbon In Nitrides by LECO C744

The determination of carbon in nitrides by LECO 744 series analyzer is a quick and direct measurement of nitride purity.Learn more...

Determination of Carbon, Hydrogen and Nitrogen in Biomass

Fast, reliable and matrix independent, the LECO CHN 628 determines the elemental composition of all kind of biofuels in just 4-5 minutes. The instrument can be equipped with an additional module for Sulfur and Oxygen content analysis.Learn more...

Hardness Profile Determination in Decarburized Steel

With LECO AMH55 automated hardness tester indentations are made and measured automatically. Advanced software features offer fully automated operation : auto stage, indentations, auto focus, auto-measurement, calculate hardness and documenting. Learn more...

Determination of Carbon and Sulfur in Tungsten Carbide

The LECO CS844 series carbon and sulfur elemental analyzer is ideally suited for the simultaneous determination of carbon and sulfur in tungsten carbide with its high precision for carbon and low level detection for sulfur.Learn more...
Return